PaceBMS support logs
Generated: 2026-06-29 01:14:02
Configured debug_output: 0

2026-06-29 00:42:27,352 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.771V, I=-3.71A, SOC=86.49% | pack_2: cells=15, V=49.764V, I=-3.58A, SOC=87.30% | pack_3: cells=15, V=49.769V, I=-3.59A, SOC=87.53% | pack_4: cells=15, V=49.801V, I=-3.49A, SOC=87.73%
2026-06-29 00:42:33,411 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:42:36,847 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.766V, I=-3.75A, SOC=86.48% | pack_2: cells=15, V=49.763V, I=-3.60A, SOC=87.30% | pack_3: cells=15, V=49.769V, I=-3.62A, SOC=87.53% | pack_4: cells=15, V=49.797V, I=-3.49A, SOC=87.72%
2026-06-29 00:42:42,901 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:42:46,347 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.771V, I=-3.68A, SOC=86.48% | pack_2: cells=15, V=49.767V, I=-3.60A, SOC=87.29% | pack_3: cells=15, V=49.763V, I=-3.61A, SOC=87.52% | pack_4: cells=15, V=49.797V, I=-3.41A, SOC=87.72%
2026-06-29 00:42:52,400 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:42:55,844 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.768V, I=-3.65A, SOC=86.48% | pack_2: cells=15, V=49.767V, I=-3.53A, SOC=87.29% | pack_3: cells=15, V=49.766V, I=-3.52A, SOC=87.52% | pack_4: cells=15, V=49.797V, I=-3.43A, SOC=87.71%
2026-06-29 00:43:01,897 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:43:05,340 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.770V, I=-3.67A, SOC=86.47% | pack_2: cells=15, V=49.763V, I=-3.51A, SOC=87.29% | pack_3: cells=15, V=49.769V, I=-3.52A, SOC=87.51% | pack_4: cells=15, V=49.797V, I=-3.43A, SOC=87.71%
2026-06-29 00:43:11,415 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:43:14,866 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.771V, I=-3.68A, SOC=86.47% | pack_2: cells=15, V=49.764V, I=-3.54A, SOC=87.28% | pack_3: cells=15, V=49.769V, I=-3.58A, SOC=87.51% | pack_4: cells=15, V=49.803V, I=-3.45A, SOC=87.70%
2026-06-29 00:43:20,910 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:43:24,355 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.766V, I=-3.70A, SOC=86.46% | pack_2: cells=15, V=49.765V, I=-3.56A, SOC=87.28% | pack_3: cells=15, V=49.763V, I=-3.55A, SOC=87.50% | pack_4: cells=15, V=49.803V, I=-3.47A, SOC=87.70%
2026-06-29 00:43:30,427 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:43:33,857 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.771V, I=-3.70A, SOC=86.46% | pack_2: cells=15, V=49.767V, I=-3.53A, SOC=87.27% | pack_3: cells=15, V=49.763V, I=-3.56A, SOC=87.50% | pack_4: cells=15, V=49.803V, I=-3.48A, SOC=87.69%
2026-06-29 00:43:39,908 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:43:43,352 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.765V, I=-3.73A, SOC=86.45% | pack_2: cells=15, V=49.767V, I=-3.53A, SOC=87.27% | pack_3: cells=15, V=49.768V, I=-3.58A, SOC=87.50% | pack_4: cells=15, V=49.802V, I=-3.45A, SOC=87.69%
2026-06-29 00:43:49,405 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:43:52,858 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.771V, I=-3.72A, SOC=86.45% | pack_2: cells=15, V=49.763V, I=-3.57A, SOC=87.26% | pack_3: cells=15, V=49.768V, I=-3.55A, SOC=87.49% | pack_4: cells=15, V=49.802V, I=-3.47A, SOC=87.68%
2026-06-29 00:43:58,910 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:44:02,350 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.769V, I=-3.57A, SOC=86.44% | pack_2: cells=15, V=49.763V, I=-3.55A, SOC=87.26% | pack_3: cells=15, V=49.763V, I=-3.56A, SOC=87.48% | pack_4: cells=15, V=49.800V, I=-3.48A, SOC=87.68%
2026-06-29 00:44:08,404 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:44:11,851 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.768V, I=-3.65A, SOC=86.44% | pack_2: cells=15, V=49.767V, I=-3.52A, SOC=87.25% | pack_3: cells=15, V=49.763V, I=-3.52A, SOC=87.48% | pack_4: cells=15, V=49.798V, I=-3.43A, SOC=87.68%
2026-06-29 00:44:17,904 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:44:21,346 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.771V, I=-3.66A, SOC=86.43% | pack_2: cells=15, V=49.767V, I=-3.49A, SOC=87.25% | pack_3: cells=15, V=49.768V, I=-3.56A, SOC=87.48% | pack_4: cells=15, V=49.798V, I=-3.45A, SOC=87.67%
2026-06-29 00:44:27,400 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:44:30,842 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.768V, I=-3.67A, SOC=86.43% | pack_2: cells=15, V=49.763V, I=-3.52A, SOC=87.24% | pack_3: cells=15, V=49.768V, I=-3.44A, SOC=87.47% | pack_4: cells=15, V=49.798V, I=-3.43A, SOC=87.67%
2026-06-29 00:44:36,896 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:44:40,339 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.771V, I=-3.73A, SOC=86.42% | pack_2: cells=15, V=49.764V, I=-3.58A, SOC=87.24% | pack_3: cells=15, V=49.766V, I=-3.56A, SOC=87.47% | pack_4: cells=15, V=49.797V, I=-3.43A, SOC=87.66%
2026-06-29 00:44:46,442 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:44:49,896 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.766V, I=-3.71A, SOC=86.42% | pack_2: cells=15, V=49.767V, I=-3.56A, SOC=87.23% | pack_3: cells=15, V=49.763V, I=-3.56A, SOC=87.46% | pack_4: cells=15, V=49.800V, I=-3.45A, SOC=87.66%
2026-06-29 00:44:55,947 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:44:59,398 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.771V, I=-3.78A, SOC=86.41% | pack_2: cells=15, V=49.765V, I=-3.54A, SOC=87.23% | pack_3: cells=15, V=49.768V, I=-3.52A, SOC=87.46% | pack_4: cells=15, V=49.803V, I=-3.44A, SOC=87.65%
2026-06-29 00:45:05,451 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:45:08,915 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.768V, I=-3.65A, SOC=86.41% | pack_2: cells=15, V=49.762V, I=-3.55A, SOC=87.23% | pack_3: cells=15, V=49.768V, I=-3.54A, SOC=87.45% | pack_4: cells=15, V=49.803V, I=-3.36A, SOC=87.65%
2026-06-29 00:45:14,985 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:45:18,419 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.771V, I=-3.03A, SOC=86.40% | pack_2: cells=15, V=49.764V, I=-2.94A, SOC=87.22% | pack_3: cells=15, V=49.766V, I=-2.87A, SOC=87.45% | pack_4: cells=15, V=49.803V, I=-2.84A, SOC=87.64%
2026-06-29 00:45:24,471 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:45:27,916 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.772V, I=-3.03A, SOC=86.40% | pack_2: cells=15, V=49.768V, I=-2.91A, SOC=87.22% | pack_3: cells=15, V=49.764V, I=-2.94A, SOC=87.44% | pack_4: cells=15, V=49.803V, I=-2.84A, SOC=87.64%
2026-06-29 00:45:33,970 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:45:37,413 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.768V, I=-3.09A, SOC=86.39% | pack_2: cells=15, V=49.767V, I=-2.96A, SOC=87.21% | pack_3: cells=15, V=49.768V, I=-2.94A, SOC=87.44% | pack_4: cells=15, V=49.803V, I=-2.88A, SOC=87.64%
2026-06-29 00:45:43,467 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:45:46,910 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.09A, SOC=86.38% | pack_2: cells=15, V=49.765V, I=-2.96A, SOC=87.21% | pack_3: cells=15, V=49.769V, I=-2.99A, SOC=87.44% | pack_4: cells=15, V=49.802V, I=-2.88A, SOC=87.63%
2026-06-29 00:45:52,965 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:45:56,409 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.768V, I=-3.12A, SOC=86.38% | pack_2: cells=15, V=49.765V, I=-3.11A, SOC=87.21% | pack_3: cells=15, V=49.769V, I=-3.06A, SOC=87.43% | pack_4: cells=15, V=49.800V, I=-3.05A, SOC=87.63%
2026-06-29 00:46:02,461 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:46:05,908 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.05A, SOC=86.37% | pack_2: cells=15, V=49.767V, I=-2.97A, SOC=87.20% | pack_3: cells=15, V=49.767V, I=-2.94A, SOC=87.43% | pack_4: cells=15, V=49.801V, I=-2.84A, SOC=87.62%
2026-06-29 00:46:11,959 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:46:15,403 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.771V, I=-3.04A, SOC=86.37% | pack_2: cells=15, V=49.768V, I=-2.93A, SOC=87.20% | pack_3: cells=15, V=49.769V, I=-2.94A, SOC=87.43% | pack_4: cells=15, V=49.800V, I=-2.85A, SOC=87.62%
2026-06-29 00:46:21,443 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:46:24,885 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.773V, I=-3.05A, SOC=86.36% | pack_2: cells=15, V=49.766V, I=-2.94A, SOC=87.19% | pack_3: cells=15, V=49.771V, I=-2.90A, SOC=87.42% | pack_4: cells=15, V=49.800V, I=-2.86A, SOC=87.62%
2026-06-29 00:46:30,940 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:46:34,380 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.05A, SOC=86.36% | pack_2: cells=15, V=49.766V, I=-2.96A, SOC=87.19% | pack_3: cells=15, V=49.771V, I=-2.89A, SOC=87.42% | pack_4: cells=15, V=49.800V, I=-2.87A, SOC=87.61%
2026-06-29 00:46:40,431 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:46:43,875 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.771V, I=-3.05A, SOC=86.36% | pack_2: cells=15, V=49.767V, I=-2.93A, SOC=87.19% | pack_3: cells=15, V=49.768V, I=-2.92A, SOC=87.41% | pack_4: cells=15, V=49.803V, I=-2.85A, SOC=87.61%
2026-06-29 00:46:49,928 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:46:53,379 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.05A, SOC=86.35% | pack_2: cells=15, V=49.768V, I=-2.97A, SOC=87.18% | pack_3: cells=15, V=49.771V, I=-2.93A, SOC=87.41% | pack_4: cells=15, V=49.803V, I=-2.85A, SOC=87.60%
2026-06-29 00:46:59,429 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:47:02,872 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.772V, I=-3.03A, SOC=86.35% | pack_2: cells=15, V=49.765V, I=-3.05A, SOC=87.18% | pack_3: cells=15, V=49.772V, I=-2.97A, SOC=87.41% | pack_4: cells=15, V=49.804V, I=-2.90A, SOC=87.60%
2026-06-29 00:47:08,923 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:47:12,366 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.17A, SOC=86.34% | pack_2: cells=15, V=49.766V, I=-2.99A, SOC=87.17% | pack_3: cells=15, V=49.772V, I=-3.00A, SOC=87.40% | pack_4: cells=15, V=49.803V, I=-2.91A, SOC=87.60%
2026-06-29 00:47:18,418 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:47:21,861 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.01A, SOC=86.34% | pack_2: cells=15, V=49.768V, I=-2.91A, SOC=87.17% | pack_3: cells=15, V=49.768V, I=-2.92A, SOC=87.40% | pack_4: cells=15, V=49.804V, I=-2.81A, SOC=87.59%
2026-06-29 00:47:27,913 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:47:31,356 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.773V, I=-3.06A, SOC=86.34% | pack_2: cells=15, V=49.768V, I=-2.90A, SOC=87.17% | pack_3: cells=15, V=49.768V, I=-2.92A, SOC=87.39% | pack_4: cells=15, V=49.804V, I=-2.82A, SOC=87.59%
2026-06-29 00:47:37,442 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:47:40,885 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.777V, I=-3.05A, SOC=86.33% | pack_2: cells=15, V=49.768V, I=-2.96A, SOC=87.16% | pack_3: cells=15, V=49.772V, I=-2.95A, SOC=87.39% | pack_4: cells=15, V=49.803V, I=-2.87A, SOC=87.59%
2026-06-29 00:47:46,960 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:47:50,402 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.10A, SOC=86.33% | pack_2: cells=15, V=49.766V, I=-2.95A, SOC=87.16% | pack_3: cells=15, V=49.772V, I=-2.98A, SOC=87.39% | pack_4: cells=15, V=49.804V, I=-2.87A, SOC=87.59%
2026-06-29 00:47:56,445 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:47:59,889 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.777V, I=-3.11A, SOC=86.32% | pack_2: cells=15, V=49.766V, I=-2.97A, SOC=87.16% | pack_3: cells=15, V=49.772V, I=-2.98A, SOC=87.38% | pack_4: cells=15, V=49.803V, I=-2.89A, SOC=87.58%
2026-06-29 00:48:05,943 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:48:09,390 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.05A, SOC=86.32% | pack_2: cells=15, V=49.768V, I=-2.97A, SOC=87.15% | pack_3: cells=15, V=49.768V, I=-2.98A, SOC=87.38% | pack_4: cells=15, V=49.803V, I=-2.90A, SOC=87.57%
2026-06-29 00:48:15,444 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:48:18,892 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.06A, SOC=86.32% | pack_2: cells=15, V=49.768V, I=-2.98A, SOC=87.15% | pack_3: cells=15, V=49.770V, I=-2.99A, SOC=87.37% | pack_4: cells=15, V=49.800V, I=-2.90A, SOC=87.57%
2026-06-29 00:48:24,944 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:48:28,387 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.08A, SOC=86.31% | pack_2: cells=15, V=49.767V, I=-2.99A, SOC=87.14% | pack_3: cells=15, V=49.772V, I=-3.01A, SOC=87.37% | pack_4: cells=15, V=49.801V, I=-2.92A, SOC=87.57%
2026-06-29 00:48:34,440 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:48:37,877 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.773V, I=-3.09A, SOC=86.31% | pack_2: cells=15, V=49.767V, I=-2.94A, SOC=87.14% | pack_3: cells=15, V=49.772V, I=-2.95A, SOC=87.37% | pack_4: cells=15, V=49.802V, I=-2.86A, SOC=87.56%
2026-06-29 00:48:43,929 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:48:47,374 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.777V, I=-3.06A, SOC=86.30% | pack_2: cells=15, V=49.768V, I=-2.95A, SOC=87.13% | pack_3: cells=15, V=49.770V, I=-3.02A, SOC=87.36% | pack_4: cells=15, V=49.803V, I=-2.87A, SOC=87.56%
2026-06-29 00:48:53,428 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:48:56,870 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.27A, SOC=86.30% | pack_2: cells=15, V=49.769V, I=-2.98A, SOC=87.13% | pack_3: cells=15, V=49.769V, I=-2.96A, SOC=87.36% | pack_4: cells=15, V=49.805V, I=-2.97A, SOC=87.56%
2026-06-29 00:49:02,921 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:49:06,360 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.10A, SOC=86.30% | pack_2: cells=15, V=49.768V, I=-2.97A, SOC=87.12% | pack_3: cells=15, V=49.774V, I=-2.98A, SOC=87.35% | pack_4: cells=15, V=49.805V, I=-2.90A, SOC=87.55%
2026-06-29 00:49:12,425 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:49:15,867 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.777V, I=-3.08A, SOC=86.30% | pack_2: cells=15, V=49.770V, I=-2.96A, SOC=87.12% | pack_3: cells=15, V=49.774V, I=-2.95A, SOC=87.35% | pack_4: cells=15, V=49.806V, I=-2.88A, SOC=87.55%
2026-06-29 00:49:21,939 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:49:25,386 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.773V, I=-3.03A, SOC=86.29% | pack_2: cells=15, V=49.769V, I=-2.96A, SOC=87.12% | pack_3: cells=15, V=49.774V, I=-2.95A, SOC=87.35% | pack_4: cells=15, V=49.806V, I=-2.88A, SOC=87.55%
2026-06-29 00:49:31,440 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:49:34,880 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.777V, I=-3.05A, SOC=86.28% | pack_2: cells=15, V=49.770V, I=-2.91A, SOC=87.12% | pack_3: cells=15, V=49.769V, I=-2.95A, SOC=87.34% | pack_4: cells=15, V=49.806V, I=-2.86A, SOC=87.54%
2026-06-29 00:49:40,933 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:49:44,378 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.05A, SOC=86.28% | pack_2: cells=15, V=49.766V, I=-2.95A, SOC=87.11% | pack_3: cells=15, V=49.771V, I=-2.96A, SOC=87.34% | pack_4: cells=15, V=49.806V, I=-2.85A, SOC=87.54%
2026-06-29 00:49:50,431 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:49:53,875 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.05A, SOC=86.27% | pack_2: cells=15, V=49.767V, I=-2.93A, SOC=87.11% | pack_3: cells=15, V=49.773V, I=-2.89A, SOC=87.34% | pack_4: cells=15, V=49.805V, I=-2.86A, SOC=87.53%
2026-06-29 00:49:59,928 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:50:03,375 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.777V, I=-3.13A, SOC=86.27% | pack_2: cells=15, V=49.770V, I=-2.97A, SOC=87.10% | pack_3: cells=15, V=49.773V, I=-2.99A, SOC=87.34% | pack_4: cells=15, V=49.804V, I=-2.92A, SOC=87.53%
2026-06-29 00:50:09,428 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:50:12,894 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.08A, SOC=86.27% | pack_2: cells=15, V=49.769V, I=-2.98A, SOC=87.10% | pack_3: cells=15, V=49.772V, I=-2.97A, SOC=87.33% | pack_4: cells=15, V=49.803V, I=-2.89A, SOC=87.53%
2026-06-29 00:50:18,965 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:50:22,395 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.777V, I=-3.04A, SOC=86.26% | pack_2: cells=15, V=49.767V, I=-2.98A, SOC=87.10% | pack_3: cells=15, V=49.769V, I=-2.87A, SOC=87.33% | pack_4: cells=15, V=49.802V, I=-2.88A, SOC=87.52%
2026-06-29 00:50:28,448 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:50:31,883 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.777V, I=-3.09A, SOC=86.26% | pack_2: cells=15, V=49.768V, I=-2.96A, SOC=87.09% | pack_3: cells=15, V=49.773V, I=-2.93A, SOC=87.32% | pack_4: cells=15, V=49.803V, I=-2.88A, SOC=87.52%
2026-06-29 00:50:37,941 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:50:41,385 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.17A, SOC=86.25% | pack_2: cells=15, V=49.769V, I=-3.00A, SOC=87.09% | pack_3: cells=15, V=49.774V, I=-3.02A, SOC=87.32% | pack_4: cells=15, V=49.801V, I=-2.93A, SOC=87.51%
2026-06-29 00:50:47,439 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:50:50,878 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.777V, I=-3.11A, SOC=86.25% | pack_2: cells=15, V=49.770V, I=-2.97A, SOC=87.08% | pack_3: cells=15, V=49.774V, I=-2.99A, SOC=87.32% | pack_4: cells=15, V=49.803V, I=-2.91A, SOC=87.51%
2026-06-29 00:50:56,945 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:51:00,389 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.773V, I=-3.10A, SOC=86.25% | pack_2: cells=15, V=49.767V, I=-2.92A, SOC=87.08% | pack_3: cells=15, V=49.771V, I=-2.99A, SOC=87.31% | pack_4: cells=15, V=49.802V, I=-2.88A, SOC=87.51%
2026-06-29 00:51:06,442 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:51:09,887 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.777V, I=-3.04A, SOC=86.24% | pack_2: cells=15, V=49.769V, I=-2.90A, SOC=87.08% | pack_3: cells=15, V=49.769V, I=-2.92A, SOC=87.31% | pack_4: cells=15, V=49.803V, I=-2.84A, SOC=87.50%
2026-06-29 00:51:15,937 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:51:19,384 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.06A, SOC=86.24% | pack_2: cells=15, V=49.771V, I=-2.92A, SOC=87.07% | pack_3: cells=15, V=49.772V, I=-2.91A, SOC=87.31% | pack_4: cells=15, V=49.805V, I=-2.83A, SOC=87.50%
2026-06-29 00:51:25,461 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:51:28,905 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.05A, SOC=86.23% | pack_2: cells=15, V=49.770V, I=-2.97A, SOC=87.07% | pack_3: cells=15, V=49.773V, I=-2.99A, SOC=87.30% | pack_4: cells=15, V=49.806V, I=-2.86A, SOC=87.50%
2026-06-29 00:51:34,961 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:51:38,400 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.05A, SOC=86.23% | pack_2: cells=15, V=49.767V, I=-2.92A, SOC=87.07% | pack_3: cells=15, V=49.773V, I=-2.92A, SOC=87.30% | pack_4: cells=15, V=49.806V, I=-2.84A, SOC=87.49%
2026-06-29 00:51:44,454 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:51:47,894 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.09A, SOC=86.23% | pack_2: cells=15, V=49.769V, I=-2.92A, SOC=87.06% | pack_3: cells=15, V=49.772V, I=-2.92A, SOC=87.29% | pack_4: cells=15, V=49.806V, I=-2.84A, SOC=87.49%
2026-06-29 00:51:53,951 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:51:57,393 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.05A, SOC=86.22% | pack_2: cells=15, V=49.770V, I=-2.95A, SOC=87.06% | pack_3: cells=15, V=49.769V, I=-2.95A, SOC=87.29% | pack_4: cells=15, V=49.806V, I=-2.86A, SOC=87.48%
2026-06-29 00:52:03,457 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:52:06,898 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.06A, SOC=86.22% | pack_2: cells=15, V=49.767V, I=-2.95A, SOC=87.05% | pack_3: cells=15, V=49.772V, I=-2.97A, SOC=87.29% | pack_4: cells=15, V=49.806V, I=-2.90A, SOC=87.47%
2026-06-29 00:52:12,950 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:52:16,391 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.08A, SOC=86.21% | pack_2: cells=15, V=49.768V, I=-2.98A, SOC=87.05% | pack_3: cells=15, V=49.774V, I=-2.87A, SOC=87.28% | pack_4: cells=15, V=49.806V, I=-2.88A, SOC=87.47%
2026-06-29 00:52:22,445 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:52:25,887 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.16A, SOC=86.21% | pack_2: cells=15, V=49.769V, I=-3.06A, SOC=87.05% | pack_3: cells=15, V=49.774V, I=-3.10A, SOC=87.27% | pack_4: cells=15, V=49.803V, I=-2.99A, SOC=87.46%
2026-06-29 00:52:31,931 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:52:35,375 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.05A, SOC=86.20% | pack_2: cells=15, V=49.769V, I=-2.94A, SOC=87.04% | pack_3: cells=15, V=49.774V, I=-2.97A, SOC=87.27% | pack_4: cells=15, V=49.804V, I=-2.85A, SOC=87.46%
2026-06-29 00:52:41,429 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:52:44,874 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.05A, SOC=86.20% | pack_2: cells=15, V=49.767V, I=-2.94A, SOC=87.04% | pack_3: cells=15, V=49.769V, I=-2.92A, SOC=87.26% | pack_4: cells=15, V=49.804V, I=-2.87A, SOC=87.45%
2026-06-29 00:52:50,926 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:52:54,372 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.06A, SOC=86.20% | pack_2: cells=15, V=49.770V, I=-2.87A, SOC=87.03% | pack_3: cells=15, V=49.772V, I=-2.95A, SOC=87.26% | pack_4: cells=15, V=49.804V, I=-2.86A, SOC=87.45%
2026-06-29 00:53:00,424 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:53:03,869 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.10A, SOC=86.19% | pack_2: cells=15, V=49.769V, I=-3.00A, SOC=87.03% | pack_3: cells=15, V=49.775V, I=-2.98A, SOC=87.26% | pack_4: cells=15, V=49.802V, I=-2.91A, SOC=87.45%
2026-06-29 00:53:09,922 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:53:13,364 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.05A, SOC=86.19% | pack_2: cells=15, V=49.767V, I=-2.96A, SOC=87.02% | pack_3: cells=15, V=49.775V, I=-2.96A, SOC=87.25% | pack_4: cells=15, V=49.802V, I=-2.90A, SOC=87.45%
2026-06-29 00:53:19,420 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:53:22,861 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.06A, SOC=86.18% | pack_2: cells=15, V=49.767V, I=-2.95A, SOC=87.02% | pack_3: cells=15, V=49.775V, I=-2.94A, SOC=87.25% | pack_4: cells=15, V=49.807V, I=-2.79A, SOC=87.44%
2026-06-29 00:53:28,915 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:53:32,360 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.05A, SOC=86.18% | pack_2: cells=15, V=49.770V, I=-2.93A, SOC=87.02% | pack_3: cells=15, V=49.771V, I=-2.94A, SOC=87.25% | pack_4: cells=15, V=49.807V, I=-2.85A, SOC=87.44%
2026-06-29 00:53:38,424 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:53:41,869 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.03A, SOC=86.18% | pack_2: cells=15, V=49.769V, I=-2.93A, SOC=87.01% | pack_3: cells=15, V=49.769V, I=-2.94A, SOC=87.24% | pack_4: cells=15, V=49.807V, I=-2.85A, SOC=87.44%
2026-06-29 00:53:47,921 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:53:51,370 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.13A, SOC=86.17% | pack_2: cells=15, V=49.768V, I=-2.94A, SOC=87.01% | pack_3: cells=15, V=49.775V, I=-2.92A, SOC=87.24% | pack_4: cells=15, V=49.807V, I=-2.87A, SOC=87.43%
2026-06-29 00:53:57,442 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:54:00,887 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.22A, SOC=86.17% | pack_2: cells=15, V=49.769V, I=-2.95A, SOC=87.01% | pack_3: cells=15, V=49.775V, I=-2.99A, SOC=87.23% | pack_4: cells=15, V=49.807V, I=-2.87A, SOC=87.43%
2026-06-29 00:54:06,938 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:54:10,376 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.11A, SOC=86.16% | pack_2: cells=15, V=49.770V, I=-2.95A, SOC=87.00% | pack_3: cells=15, V=49.775V, I=-3.00A, SOC=87.23% | pack_4: cells=15, V=49.806V, I=-2.92A, SOC=87.42%
2026-06-29 00:54:16,430 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:54:19,874 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.05A, SOC=86.16% | pack_2: cells=15, V=49.770V, I=-2.93A, SOC=87.00% | pack_3: cells=15, V=49.772V, I=-2.95A, SOC=87.23% | pack_4: cells=15, V=49.806V, I=-2.86A, SOC=87.42%
2026-06-29 00:54:25,922 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:54:29,362 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.11A, SOC=86.16% | pack_2: cells=15, V=49.768V, I=-2.94A, SOC=86.99% | pack_3: cells=15, V=49.770V, I=-2.97A, SOC=87.22% | pack_4: cells=15, V=49.804V, I=-2.88A, SOC=87.41%
2026-06-29 00:54:35,418 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:54:38,858 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.06A, SOC=86.15% | pack_2: cells=15, V=49.768V, I=-2.95A, SOC=86.98% | pack_3: cells=15, V=49.774V, I=-2.96A, SOC=87.22% | pack_4: cells=15, V=49.804V, I=-2.87A, SOC=87.41%
2026-06-29 00:54:44,912 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:54:48,348 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.05A, SOC=86.15% | pack_2: cells=15, V=49.770V, I=-2.94A, SOC=86.98% | pack_3: cells=15, V=49.774V, I=-2.97A, SOC=87.21% | pack_4: cells=15, V=49.802V, I=-2.87A, SOC=87.40%
2026-06-29 00:54:54,401 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:54:57,849 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.17A, SOC=86.14% | pack_2: cells=15, V=49.771V, I=-2.94A, SOC=86.97% | pack_3: cells=15, V=49.774V, I=-3.11A, SOC=87.21% | pack_4: cells=15, V=49.801V, I=-2.89A, SOC=87.40%
2026-06-29 00:55:03,891 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:55:07,333 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.10A, SOC=86.14% | pack_2: cells=15, V=49.768V, I=-2.96A, SOC=86.97% | pack_3: cells=15, V=49.769V, I=-2.99A, SOC=87.20% | pack_4: cells=15, V=49.804V, I=-2.88A, SOC=87.40%
2026-06-29 00:55:13,388 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:55:16,851 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.04A, SOC=86.14% | pack_2: cells=15, V=49.770V, I=-2.97A, SOC=86.96% | pack_3: cells=15, V=49.769V, I=-3.01A, SOC=87.20% | pack_4: cells=15, V=49.804V, I=-2.88A, SOC=87.39%
2026-06-29 00:55:22,911 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:55:26,344 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.07A, SOC=86.14% | pack_2: cells=15, V=49.770V, I=-2.94A, SOC=86.96% | pack_3: cells=15, V=49.773V, I=-2.95A, SOC=87.20% | pack_4: cells=15, V=49.805V, I=-2.87A, SOC=87.39%
2026-06-29 00:55:32,397 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:55:35,837 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.07A, SOC=86.13% | pack_2: cells=15, V=49.771V, I=-3.05A, SOC=86.96% | pack_3: cells=15, V=49.774V, I=-3.03A, SOC=87.20% | pack_4: cells=15, V=49.807V, I=-3.00A, SOC=87.39%
2026-06-29 00:55:41,891 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:55:45,335 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.08A, SOC=86.13% | pack_2: cells=15, V=49.768V, I=-2.96A, SOC=86.95% | pack_3: cells=15, V=49.774V, I=-2.95A, SOC=87.20% | pack_4: cells=15, V=49.807V, I=-2.87A, SOC=87.38%
2026-06-29 00:55:51,389 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:55:54,828 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.03A, SOC=86.12% | pack_2: cells=15, V=49.769V, I=-2.93A, SOC=86.95% | pack_3: cells=15, V=49.772V, I=-2.93A, SOC=87.19% | pack_4: cells=15, V=49.807V, I=-2.86A, SOC=87.38%
2026-06-29 00:55:54,857 [Monitor] [Monitor] [debug 1] [INFO] [monitor] Publishing HA Discovery topics...
2026-06-29 00:56:00,906 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:56:04,346 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.03A, SOC=86.12% | pack_2: cells=15, V=49.771V, I=-2.93A, SOC=86.95% | pack_3: cells=15, V=49.770V, I=-2.95A, SOC=87.19% | pack_4: cells=15, V=49.807V, I=-2.85A, SOC=87.37%
2026-06-29 00:56:10,397 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:56:13,843 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.02A, SOC=86.12% | pack_2: cells=15, V=49.768V, I=-2.94A, SOC=86.95% | pack_3: cells=15, V=49.775V, I=-2.94A, SOC=87.18% | pack_4: cells=15, V=49.807V, I=-2.85A, SOC=87.37%
2026-06-29 00:56:19,894 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:56:23,339 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.10A, SOC=86.11% | pack_2: cells=15, V=49.770V, I=-2.97A, SOC=86.94% | pack_3: cells=15, V=49.775V, I=-3.06A, SOC=87.18% | pack_4: cells=15, V=49.807V, I=-2.86A, SOC=87.37%
2026-06-29 00:56:29,392 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:56:32,834 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.06A, SOC=86.11% | pack_2: cells=15, V=49.771V, I=-2.92A, SOC=86.94% | pack_3: cells=15, V=49.775V, I=-2.95A, SOC=87.18% | pack_4: cells=15, V=49.806V, I=-2.85A, SOC=87.36%
2026-06-29 00:56:38,911 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:56:42,357 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.06A, SOC=86.10% | pack_2: cells=15, V=49.772V, I=-2.93A, SOC=86.93% | pack_3: cells=15, V=49.769V, I=-2.94A, SOC=87.17% | pack_4: cells=15, V=49.807V, I=-2.88A, SOC=87.36%
2026-06-29 00:56:48,434 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:56:51,880 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.777V, I=-3.07A, SOC=86.10% | pack_2: cells=15, V=49.769V, I=-2.98A, SOC=86.93% | pack_3: cells=15, V=49.771V, I=-2.95A, SOC=87.17% | pack_4: cells=15, V=49.804V, I=-2.88A, SOC=87.35%
2026-06-29 00:56:57,935 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:57:01,378 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.12A, SOC=86.10% | pack_2: cells=15, V=49.768V, I=-2.98A, SOC=86.93% | pack_3: cells=15, V=49.774V, I=-3.01A, SOC=87.16% | pack_4: cells=15, V=49.803V, I=-3.03A, SOC=87.35%
2026-06-29 00:57:07,431 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:57:10,878 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.10A, SOC=86.09% | pack_2: cells=15, V=49.770V, I=-2.96A, SOC=86.92% | pack_3: cells=15, V=49.774V, I=-2.99A, SOC=87.16% | pack_4: cells=15, V=49.804V, I=-2.93A, SOC=87.35%
2026-06-29 00:57:16,932 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:57:20,378 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.13A, SOC=86.09% | pack_2: cells=15, V=49.771V, I=-2.95A, SOC=86.92% | pack_3: cells=15, V=49.774V, I=-2.97A, SOC=87.16% | pack_4: cells=15, V=49.802V, I=-2.90A, SOC=87.34%
2026-06-29 00:57:26,429 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:57:29,873 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.10A, SOC=86.08% | pack_2: cells=15, V=49.768V, I=-2.99A, SOC=86.91% | pack_3: cells=15, V=49.769V, I=-3.00A, SOC=87.15% | pack_4: cells=15, V=49.801V, I=-2.91A, SOC=87.34%
2026-06-29 00:57:35,928 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:57:39,375 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.779V, I=-3.06A, SOC=86.08% | pack_2: cells=15, V=49.769V, I=-2.94A, SOC=86.91% | pack_3: cells=15, V=49.774V, I=-2.94A, SOC=87.15% | pack_4: cells=15, V=49.804V, I=-2.82A, SOC=87.34%
2026-06-29 00:57:45,430 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:57:48,873 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.09A, SOC=86.08% | pack_2: cells=15, V=49.771V, I=-3.00A, SOC=86.90% | pack_3: cells=15, V=49.775V, I=-2.96A, SOC=87.14% | pack_4: cells=15, V=49.802V, I=-2.98A, SOC=87.33%
2026-06-29 00:57:54,925 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:57:58,370 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.04A, SOC=86.07% | pack_2: cells=15, V=49.770V, I=-2.93A, SOC=86.90% | pack_3: cells=15, V=49.775V, I=-2.94A, SOC=87.14% | pack_4: cells=15, V=49.804V, I=-2.85A, SOC=87.33%
2026-06-29 00:58:04,409 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:58:07,855 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.06A, SOC=86.07% | pack_2: cells=15, V=49.769V, I=-2.93A, SOC=86.89% | pack_3: cells=15, V=49.770V, I=-2.95A, SOC=87.14% | pack_4: cells=15, V=49.804V, I=-2.93A, SOC=87.32%
2026-06-29 00:58:13,916 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:58:17,358 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.777V, I=-3.09A, SOC=86.06% | pack_2: cells=15, V=49.770V, I=-2.97A, SOC=86.89% | pack_3: cells=15, V=49.772V, I=-2.97A, SOC=87.13% | pack_4: cells=15, V=49.806V, I=-2.88A, SOC=87.32%
2026-06-29 00:58:23,411 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:58:26,854 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.777V, I=-3.10A, SOC=86.05% | pack_2: cells=15, V=49.770V, I=-2.92A, SOC=86.89% | pack_3: cells=15, V=49.775V, I=-2.99A, SOC=87.13% | pack_4: cells=15, V=49.808V, I=-2.88A, SOC=87.32%
2026-06-29 00:58:32,916 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:58:36,356 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.10A, SOC=86.05% | pack_2: cells=15, V=49.769V, I=-2.99A, SOC=86.88% | pack_3: cells=15, V=49.775V, I=-3.00A, SOC=87.12% | pack_4: cells=15, V=49.808V, I=-2.92A, SOC=87.31%
2026-06-29 00:58:42,417 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:58:45,879 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.08A, SOC=86.05% | pack_2: cells=15, V=49.769V, I=-3.00A, SOC=86.88% | pack_3: cells=15, V=49.769V, I=-2.99A, SOC=87.12% | pack_4: cells=15, V=49.808V, I=-2.91A, SOC=87.31%
2026-06-29 00:58:51,932 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:58:55,381 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.13A, SOC=86.04% | pack_2: cells=15, V=49.771V, I=-3.06A, SOC=86.87% | pack_3: cells=15, V=49.770V, I=-3.02A, SOC=87.12% | pack_4: cells=15, V=49.808V, I=-2.92A, SOC=87.31%
2026-06-29 00:59:01,434 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:59:04,879 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.08A, SOC=86.04% | pack_2: cells=15, V=49.767V, I=-3.05A, SOC=86.87% | pack_3: cells=15, V=49.774V, I=-3.08A, SOC=87.11% | pack_4: cells=15, V=49.808V, I=-3.03A, SOC=87.31%
2026-06-29 00:59:10,934 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:59:14,379 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.05A, SOC=86.03% | pack_2: cells=15, V=49.768V, I=-2.92A, SOC=86.87% | pack_3: cells=15, V=49.775V, I=-2.95A, SOC=87.11% | pack_4: cells=15, V=49.808V, I=-2.87A, SOC=87.30%
2026-06-29 00:59:20,432 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:59:23,875 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.06A, SOC=86.03% | pack_2: cells=15, V=49.771V, I=-2.92A, SOC=86.86% | pack_3: cells=15, V=49.775V, I=-2.94A, SOC=87.11% | pack_4: cells=15, V=49.808V, I=-2.86A, SOC=87.30%
2026-06-29 00:59:29,935 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:59:33,383 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.05A, SOC=86.03% | pack_2: cells=15, V=49.769V, I=-2.93A, SOC=86.86% | pack_3: cells=15, V=49.771V, I=-2.94A, SOC=87.10% | pack_4: cells=15, V=49.806V, I=-2.86A, SOC=87.30%
2026-06-29 00:59:39,427 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:59:42,871 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.05A, SOC=86.02% | pack_2: cells=15, V=49.768V, I=-2.93A, SOC=86.86% | pack_3: cells=15, V=49.774V, I=-2.91A, SOC=87.10% | pack_4: cells=15, V=49.807V, I=-2.84A, SOC=87.29%
2026-06-29 00:59:48,948 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 00:59:52,394 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.13A, SOC=86.02% | pack_2: cells=15, V=49.770V, I=-3.03A, SOC=86.85% | pack_3: cells=15, V=49.775V, I=-3.00A, SOC=87.09% | pack_4: cells=15, V=49.805V, I=-2.92A, SOC=87.29%
2026-06-29 00:59:58,450 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:00:01,891 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.12A, SOC=86.01% | pack_2: cells=15, V=49.770V, I=-2.98A, SOC=86.85% | pack_3: cells=15, V=49.775V, I=-2.99A, SOC=87.09% | pack_4: cells=15, V=49.805V, I=-2.91A, SOC=87.28%
2026-06-29 01:00:07,962 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:00:11,406 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.16A, SOC=86.01% | pack_2: cells=15, V=49.767V, I=-3.01A, SOC=86.84% | pack_3: cells=15, V=49.769V, I=-3.00A, SOC=87.08% | pack_4: cells=15, V=49.804V, I=-2.93A, SOC=87.28%
2026-06-29 01:00:17,486 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:00:20,955 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-2.97A, SOC=86.01% | pack_2: cells=15, V=49.770V, I=-2.98A, SOC=86.84% | pack_3: cells=15, V=49.773V, I=-2.94A, SOC=87.07% | pack_4: cells=15, V=49.805V, I=-2.90A, SOC=87.28%
2026-06-29 01:00:27,026 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:00:30,462 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.08A, SOC=86.00% | pack_2: cells=15, V=49.771V, I=-2.95A, SOC=86.84% | pack_3: cells=15, V=49.774V, I=-3.06A, SOC=87.06% | pack_4: cells=15, V=49.803V, I=-2.92A, SOC=87.27%
2026-06-29 01:00:36,510 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:00:39,951 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.10A, SOC=85.99% | pack_2: cells=15, V=49.768V, I=-2.98A, SOC=86.83% | pack_3: cells=15, V=49.774V, I=-3.00A, SOC=87.06% | pack_4: cells=15, V=49.805V, I=-2.90A, SOC=87.27%
2026-06-29 01:00:46,051 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:00:49,497 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.11A, SOC=85.98% | pack_2: cells=15, V=49.770V, I=-2.95A, SOC=86.83% | pack_3: cells=15, V=49.769V, I=-2.99A, SOC=87.06% | pack_4: cells=15, V=49.805V, I=-2.91A, SOC=87.26%
2026-06-29 01:00:55,557 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:00:58,997 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.11A, SOC=85.98% | pack_2: cells=15, V=49.771V, I=-2.99A, SOC=86.82% | pack_3: cells=15, V=49.772V, I=-3.01A, SOC=87.05% | pack_4: cells=15, V=49.805V, I=-2.91A, SOC=87.26%
2026-06-29 01:01:05,054 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:01:08,489 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-3.10A, SOC=85.98% | pack_2: cells=15, V=49.769V, I=-2.93A, SOC=86.82% | pack_3: cells=15, V=49.774V, I=-2.97A, SOC=87.05% | pack_4: cells=15, V=49.805V, I=-2.90A, SOC=87.25%
2026-06-29 01:01:14,543 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:01:17,989 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.02A, SOC=85.97% | pack_2: cells=15, V=49.768V, I=-2.91A, SOC=86.82% | pack_3: cells=15, V=49.775V, I=-2.94A, SOC=87.05% | pack_4: cells=15, V=49.808V, I=-2.86A, SOC=87.25%
2026-06-29 01:01:24,042 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:01:27,487 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.779V, I=-3.05A, SOC=85.97% | pack_2: cells=15, V=49.770V, I=-2.93A, SOC=86.81% | pack_3: cells=15, V=49.774V, I=-2.94A, SOC=87.04% | pack_4: cells=15, V=49.807V, I=-2.85A, SOC=87.25%
2026-06-29 01:01:33,539 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:01:36,980 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.03A, SOC=85.97% | pack_2: cells=15, V=49.771V, I=-2.84A, SOC=86.81% | pack_3: cells=15, V=49.769V, I=-2.92A, SOC=87.04% | pack_4: cells=15, V=49.808V, I=-2.86A, SOC=87.24%
2026-06-29 01:01:43,034 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:01:46,477 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.779V, I=-3.08A, SOC=85.96% | pack_2: cells=15, V=49.768V, I=-2.92A, SOC=86.81% | pack_3: cells=15, V=49.774V, I=-2.94A, SOC=87.04% | pack_4: cells=15, V=49.808V, I=-2.86A, SOC=87.24%
2026-06-29 01:01:52,531 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:01:55,973 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.779V, I=-3.03A, SOC=85.96% | pack_2: cells=15, V=49.769V, I=-2.94A, SOC=86.80% | pack_3: cells=15, V=49.774V, I=-2.99A, SOC=87.03% | pack_4: cells=15, V=49.808V, I=-2.86A, SOC=87.23%
2026-06-29 01:02:02,024 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:02:05,467 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.06A, SOC=85.96% | pack_2: cells=15, V=49.770V, I=-2.91A, SOC=86.80% | pack_3: cells=15, V=49.774V, I=-2.93A, SOC=87.03% | pack_4: cells=15, V=49.808V, I=-2.86A, SOC=87.23%
2026-06-29 01:02:11,521 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:02:14,965 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.779V, I=-3.07A, SOC=85.95% | pack_2: cells=15, V=49.768V, I=-2.93A, SOC=86.79% | pack_3: cells=15, V=49.770V, I=-2.94A, SOC=87.02% | pack_4: cells=15, V=49.808V, I=-2.87A, SOC=87.23%
2026-06-29 01:02:21,017 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:02:24,458 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.09A, SOC=85.95% | pack_2: cells=15, V=49.770V, I=-2.95A, SOC=86.79% | pack_3: cells=15, V=49.774V, I=-2.95A, SOC=87.02% | pack_4: cells=15, V=49.808V, I=-2.87A, SOC=87.22%
2026-06-29 01:02:30,511 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:02:33,955 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.780V, I=-3.06A, SOC=85.94% | pack_2: cells=15, V=49.770V, I=-2.92A, SOC=86.78% | pack_3: cells=15, V=49.775V, I=-2.95A, SOC=87.02% | pack_4: cells=15, V=49.808V, I=-2.87A, SOC=87.22%
2026-06-29 01:02:40,015 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:02:43,457 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.779V, I=-3.03A, SOC=85.94% | pack_2: cells=15, V=49.769V, I=-2.94A, SOC=86.78% | pack_3: cells=15, V=49.775V, I=-2.94A, SOC=87.01% | pack_4: cells=15, V=49.807V, I=-2.85A, SOC=87.21%
2026-06-29 01:02:49,510 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:02:52,951 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.03A, SOC=85.94% | pack_2: cells=15, V=49.768V, I=-2.90A, SOC=86.78% | pack_3: cells=15, V=49.769V, I=-2.94A, SOC=87.01% | pack_4: cells=15, V=49.807V, I=-2.85A, SOC=87.21%
2026-06-29 01:02:59,005 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:03:02,450 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.780V, I=-3.02A, SOC=85.93% | pack_2: cells=15, V=49.770V, I=-2.88A, SOC=86.78% | pack_3: cells=15, V=49.774V, I=-2.93A, SOC=87.00% | pack_4: cells=15, V=49.806V, I=-2.81A, SOC=87.21%
2026-06-29 01:03:08,504 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:03:11,951 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.777V, I=-3.01A, SOC=85.93% | pack_2: cells=15, V=49.771V, I=-2.93A, SOC=86.78% | pack_3: cells=15, V=49.775V, I=-2.93A, SOC=87.00% | pack_4: cells=15, V=49.805V, I=-2.84A, SOC=87.20%
2026-06-29 01:03:18,007 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:03:21,452 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.779V, I=-3.00A, SOC=85.92% | pack_2: cells=15, V=49.768V, I=-2.89A, SOC=86.77% | pack_3: cells=15, V=49.775V, I=-2.90A, SOC=87.00% | pack_4: cells=15, V=49.804V, I=-2.81A, SOC=87.20%
2026-06-29 01:03:27,536 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:03:30,985 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.779V, I=-3.01A, SOC=85.92% | pack_2: cells=15, V=49.769V, I=-2.90A, SOC=86.77% | pack_3: cells=15, V=49.772V, I=-2.88A, SOC=86.99% | pack_4: cells=15, V=49.805V, I=-2.81A, SOC=87.20%
2026-06-29 01:03:37,037 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:03:40,478 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.05A, SOC=85.91% | pack_2: cells=15, V=49.770V, I=-2.93A, SOC=86.76% | pack_3: cells=15, V=49.772V, I=-2.92A, SOC=86.99% | pack_4: cells=15, V=49.805V, I=-2.86A, SOC=87.19%
2026-06-29 01:03:46,530 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:03:49,973 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.779V, I=-2.99A, SOC=85.91% | pack_2: cells=15, V=49.771V, I=-2.92A, SOC=86.76% | pack_3: cells=15, V=49.775V, I=-2.90A, SOC=86.99% | pack_4: cells=15, V=49.805V, I=-2.84A, SOC=87.19%
2026-06-29 01:03:56,025 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:03:59,471 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.01A, SOC=85.90% | pack_2: cells=15, V=49.768V, I=-2.89A, SOC=86.76% | pack_3: cells=15, V=49.775V, I=-2.89A, SOC=86.98% | pack_4: cells=15, V=49.805V, I=-2.82A, SOC=87.18%
2026-06-29 01:04:05,526 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:04:08,968 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.777V, I=-3.06A, SOC=85.90% | pack_2: cells=15, V=49.770V, I=-2.94A, SOC=86.75% | pack_3: cells=15, V=49.772V, I=-3.05A, SOC=86.98% | pack_4: cells=15, V=49.807V, I=-2.85A, SOC=87.18%
2026-06-29 01:04:15,022 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:04:18,466 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.779V, I=-3.09A, SOC=85.89% | pack_2: cells=15, V=49.770V, I=-2.97A, SOC=86.75% | pack_3: cells=15, V=49.769V, I=-3.00A, SOC=86.97% | pack_4: cells=15, V=49.808V, I=-2.91A, SOC=87.18%
2026-06-29 01:04:24,554 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:04:27,999 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.08A, SOC=85.89% | pack_2: cells=15, V=49.769V, I=-2.97A, SOC=86.74% | pack_3: cells=15, V=49.774V, I=-3.00A, SOC=86.97% | pack_4: cells=15, V=49.808V, I=-2.91A, SOC=87.17%
2026-06-29 01:04:34,053 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:04:37,494 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.779V, I=-3.08A, SOC=85.89% | pack_2: cells=15, V=49.770V, I=-2.97A, SOC=86.74% | pack_3: cells=15, V=49.775V, I=-2.99A, SOC=86.97% | pack_4: cells=15, V=49.808V, I=-2.88A, SOC=87.17%
2026-06-29 01:04:43,546 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:04:46,987 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.778V, I=-2.98A, SOC=85.88% | pack_2: cells=15, V=49.771V, I=-2.98A, SOC=86.74% | pack_3: cells=15, V=49.775V, I=-2.95A, SOC=86.96% | pack_4: cells=15, V=49.808V, I=-2.86A, SOC=87.17%
2026-06-29 01:04:53,041 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:04:56,481 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.05A, SOC=85.88% | pack_2: cells=15, V=49.769V, I=-2.92A, SOC=86.73% | pack_3: cells=15, V=49.775V, I=-2.94A, SOC=86.96% | pack_4: cells=15, V=49.808V, I=-2.85A, SOC=87.17%
2026-06-29 01:05:02,537 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:05:05,981 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.779V, I=-3.10A, SOC=85.87% | pack_2: cells=15, V=49.769V, I=-2.96A, SOC=86.73% | pack_3: cells=15, V=49.772V, I=-3.08A, SOC=86.96% | pack_4: cells=15, V=49.808V, I=-3.00A, SOC=87.16%
2026-06-29 01:05:12,034 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:05:15,480 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.07A, SOC=85.87% | pack_2: cells=15, V=49.770V, I=-2.92A, SOC=86.73% | pack_3: cells=15, V=49.772V, I=-2.93A, SOC=86.95% | pack_4: cells=15, V=49.807V, I=-2.90A, SOC=87.16%
2026-06-29 01:05:21,546 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:05:25,010 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.779V, I=-3.01A, SOC=85.87% | pack_2: cells=15, V=49.770V, I=-2.93A, SOC=86.72% | pack_3: cells=15, V=49.775V, I=-2.92A, SOC=86.95% | pack_4: cells=15, V=49.808V, I=-2.81A, SOC=87.16%
2026-06-29 01:05:31,075 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:05:34,509 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.779V, I=-3.01A, SOC=85.86% | pack_2: cells=15, V=49.768V, I=-2.90A, SOC=86.72% | pack_3: cells=15, V=49.775V, I=-2.92A, SOC=86.94% | pack_4: cells=15, V=49.806V, I=-2.82A, SOC=87.15%
2026-06-29 01:05:40,562 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:05:44,004 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-3.05A, SOC=85.86% | pack_2: cells=15, V=49.769V, I=-2.94A, SOC=86.71% | pack_3: cells=15, V=49.775V, I=-2.94A, SOC=86.94% | pack_4: cells=15, V=49.806V, I=-2.83A, SOC=87.15%
2026-06-29 01:05:50,059 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:05:53,507 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.59A, SOC=85.85% | pack_2: cells=15, V=49.762V, I=-3.44A, SOC=86.71% | pack_3: cells=15, V=49.760V, I=-3.55A, SOC=86.93% | pack_4: cells=15, V=49.804V, I=-3.38A, SOC=87.14%
2026-06-29 01:05:59,564 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:06:03,006 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.770V, I=-3.67A, SOC=85.85% | pack_2: cells=15, V=49.763V, I=-3.47A, SOC=86.70% | pack_3: cells=15, V=49.760V, I=-3.47A, SOC=86.93% | pack_4: cells=15, V=49.804V, I=-3.39A, SOC=87.14%
2026-06-29 01:06:09,063 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:06:12,506 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.65A, SOC=85.84% | pack_2: cells=15, V=49.760V, I=-3.49A, SOC=86.70% | pack_3: cells=15, V=49.765V, I=-3.54A, SOC=86.92% | pack_4: cells=15, V=49.803V, I=-3.43A, SOC=87.13%
2026-06-29 01:06:18,559 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:06:22,004 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.773V, I=-3.62A, SOC=85.84% | pack_2: cells=15, V=49.763V, I=-3.51A, SOC=86.69% | pack_3: cells=15, V=49.770V, I=-3.50A, SOC=86.92% | pack_4: cells=15, V=49.803V, I=-3.42A, SOC=87.13%
2026-06-29 01:06:28,046 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:06:31,492 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.769V, I=-3.66A, SOC=85.83% | pack_2: cells=15, V=49.763V, I=-3.52A, SOC=86.69% | pack_3: cells=15, V=49.770V, I=-3.53A, SOC=86.92% | pack_4: cells=15, V=49.803V, I=-3.44A, SOC=87.12%
2026-06-29 01:06:37,543 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:06:40,979 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-3.62A, SOC=85.83% | pack_2: cells=15, V=49.759V, I=-3.51A, SOC=86.68% | pack_3: cells=15, V=49.769V, I=-3.48A, SOC=86.92% | pack_4: cells=15, V=49.803V, I=-3.42A, SOC=87.12%
2026-06-29 01:06:47,021 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:06:50,462 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.769V, I=-3.63A, SOC=85.82% | pack_2: cells=15, V=49.761V, I=-3.49A, SOC=86.67% | pack_3: cells=15, V=49.764V, I=-3.47A, SOC=86.91% | pack_4: cells=15, V=49.803V, I=-3.42A, SOC=87.11%
2026-06-29 01:06:56,516 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:06:59,961 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.769V, I=-3.61A, SOC=85.82% | pack_2: cells=15, V=49.763V, I=-3.47A, SOC=86.67% | pack_3: cells=15, V=49.765V, I=-3.48A, SOC=86.91% | pack_4: cells=15, V=49.804V, I=-3.42A, SOC=87.11%
2026-06-29 01:07:06,014 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:07:09,461 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.57A, SOC=85.82% | pack_2: cells=15, V=49.762V, I=-3.48A, SOC=86.67% | pack_3: cells=15, V=49.768V, I=-3.42A, SOC=86.90% | pack_4: cells=15, V=49.804V, I=-3.33A, SOC=87.11%
2026-06-29 01:07:15,519 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:07:18,965 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.768V, I=-3.36A, SOC=85.81% | pack_2: cells=15, V=49.759V, I=-3.46A, SOC=86.66% | pack_3: cells=15, V=49.770V, I=-3.47A, SOC=86.90% | pack_4: cells=15, V=49.806V, I=-3.39A, SOC=87.10%
2026-06-29 01:07:25,016 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:07:28,461 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.41A, SOC=85.81% | pack_2: cells=15, V=49.762V, I=-3.25A, SOC=86.66% | pack_3: cells=15, V=49.770V, I=-3.27A, SOC=86.89% | pack_4: cells=15, V=49.806V, I=-3.20A, SOC=87.10%
2026-06-29 01:07:34,515 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:07:37,955 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.771V, I=-3.43A, SOC=85.81% | pack_2: cells=15, V=49.763V, I=-3.41A, SOC=86.65% | pack_3: cells=15, V=49.766V, I=-3.35A, SOC=86.89% | pack_4: cells=15, V=49.806V, I=-3.33A, SOC=87.09%
2026-06-29 01:07:44,008 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:07:47,454 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.770V, I=-3.33A, SOC=85.80% | pack_2: cells=15, V=49.762V, I=-3.23A, SOC=86.65% | pack_3: cells=15, V=49.766V, I=-3.24A, SOC=86.88% | pack_4: cells=15, V=49.806V, I=-3.24A, SOC=87.08%
2026-06-29 01:07:53,506 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:07:56,949 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.773V, I=-3.33A, SOC=85.80% | pack_2: cells=15, V=49.762V, I=-3.19A, SOC=86.64% | pack_3: cells=15, V=49.769V, I=-3.20A, SOC=86.88% | pack_4: cells=15, V=49.806V, I=-3.11A, SOC=87.08%
2026-06-29 01:08:03,002 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:08:06,446 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.771V, I=-3.16A, SOC=85.79% | pack_2: cells=15, V=49.763V, I=-3.03A, SOC=86.64% | pack_3: cells=15, V=49.769V, I=-3.05A, SOC=86.87% | pack_4: cells=15, V=49.806V, I=-2.98A, SOC=87.08%
2026-06-29 01:08:12,505 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:08:15,938 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.36A, SOC=85.79% | pack_2: cells=15, V=49.763V, I=-3.04A, SOC=86.64% | pack_3: cells=15, V=49.769V, I=-3.05A, SOC=86.87% | pack_4: cells=15, V=49.806V, I=-2.97A, SOC=87.07%
2026-06-29 01:08:21,992 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:08:25,438 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.772V, I=-3.35A, SOC=85.78% | pack_2: cells=15, V=49.762V, I=-3.24A, SOC=86.63% | pack_3: cells=15, V=49.767V, I=-3.23A, SOC=86.86% | pack_4: cells=15, V=49.803V, I=-3.17A, SOC=87.07%
2026-06-29 01:08:31,492 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:08:34,937 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.770V, I=-3.35A, SOC=85.78% | pack_2: cells=15, V=49.762V, I=-3.22A, SOC=86.63% | pack_3: cells=15, V=49.767V, I=-3.23A, SOC=86.86% | pack_4: cells=15, V=49.805V, I=-3.15A, SOC=87.06%
2026-06-29 01:08:40,992 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:08:44,438 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.29A, SOC=85.78% | pack_2: cells=15, V=49.763V, I=-3.17A, SOC=86.62% | pack_3: cells=15, V=49.769V, I=-3.17A, SOC=86.85% | pack_4: cells=15, V=49.804V, I=-3.09A, SOC=87.06%
2026-06-29 01:08:50,516 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:08:53,959 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.771V, I=-3.29A, SOC=85.77% | pack_2: cells=15, V=49.761V, I=-3.17A, SOC=86.62% | pack_3: cells=15, V=49.769V, I=-3.19A, SOC=86.85% | pack_4: cells=15, V=49.803V, I=-3.09A, SOC=87.06%
2026-06-29 01:09:00,017 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:09:03,463 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.773V, I=-3.28A, SOC=85.77% | pack_2: cells=15, V=49.762V, I=-3.17A, SOC=86.62% | pack_3: cells=15, V=49.769V, I=-3.17A, SOC=86.85% | pack_4: cells=15, V=49.805V, I=-3.08A, SOC=87.05%
2026-06-29 01:09:09,507 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:09:12,949 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.773V, I=-3.25A, SOC=85.76% | pack_2: cells=15, V=49.763V, I=-3.16A, SOC=86.61% | pack_3: cells=15, V=49.769V, I=-3.15A, SOC=86.84% | pack_4: cells=15, V=49.803V, I=-3.06A, SOC=87.05%
2026-06-29 01:09:19,002 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:09:22,444 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.770V, I=-3.25A, SOC=85.76% | pack_2: cells=15, V=49.763V, I=-3.13A, SOC=86.61% | pack_3: cells=15, V=49.767V, I=-3.13A, SOC=86.84% | pack_4: cells=15, V=49.805V, I=-3.06A, SOC=87.04%
2026-06-29 01:09:28,496 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:09:31,941 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-3.26A, SOC=85.75% | pack_2: cells=15, V=49.761V, I=-3.14A, SOC=86.61% | pack_3: cells=15, V=49.767V, I=-3.14A, SOC=86.83% | pack_4: cells=15, V=49.805V, I=-3.05A, SOC=87.04%
2026-06-29 01:09:37,990 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:09:41,435 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.772V, I=-3.11A, SOC=85.75% | pack_2: cells=15, V=49.762V, I=-3.13A, SOC=86.60% | pack_3: cells=15, V=49.770V, I=-3.16A, SOC=86.83% | pack_4: cells=15, V=49.805V, I=-3.05A, SOC=87.04%
2026-06-29 01:09:47,475 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:09:50,919 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.772V, I=-3.03A, SOC=85.75% | pack_2: cells=15, V=49.763V, I=-2.95A, SOC=86.60% | pack_3: cells=15, V=49.770V, I=-2.95A, SOC=86.83% | pack_4: cells=15, V=49.806V, I=-2.84A, SOC=87.03%
2026-06-29 01:09:56,976 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:10:00,415 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-2.70A, SOC=85.74% | pack_2: cells=15, V=49.764V, I=-2.57A, SOC=86.60% | pack_3: cells=15, V=49.770V, I=-2.58A, SOC=86.82% | pack_4: cells=15, V=49.806V, I=-2.53A, SOC=87.03%
2026-06-29 01:10:06,492 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:10:09,936 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.773V, I=-2.68A, SOC=85.74% | pack_2: cells=15, V=49.764V, I=-2.60A, SOC=86.59% | pack_3: cells=15, V=49.769V, I=-2.61A, SOC=86.82% | pack_4: cells=15, V=49.808V, I=-2.53A, SOC=87.03%
2026-06-29 01:10:15,973 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:10:19,418 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.774V, I=-2.70A, SOC=85.74% | pack_2: cells=15, V=49.764V, I=-2.61A, SOC=86.59% | pack_3: cells=15, V=49.770V, I=-2.61A, SOC=86.81% | pack_4: cells=15, V=49.809V, I=-2.53A, SOC=87.03%
2026-06-29 01:10:25,472 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:10:28,938 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.775V, I=-2.72A, SOC=85.73% | pack_2: cells=15, V=49.766V, I=-2.61A, SOC=86.59% | pack_3: cells=15, V=49.772V, I=-2.61A, SOC=86.81% | pack_4: cells=15, V=49.809V, I=-2.54A, SOC=87.02%
2026-06-29 01:10:35,004 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:10:38,437 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-2.70A, SOC=85.73% | pack_2: cells=15, V=49.766V, I=-2.60A, SOC=86.58% | pack_3: cells=15, V=49.775V, I=-2.62A, SOC=86.81% | pack_4: cells=15, V=49.809V, I=-2.54A, SOC=87.02%
2026-06-29 01:10:44,486 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:10:47,924 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-2.67A, SOC=85.72% | pack_2: cells=15, V=49.767V, I=-2.60A, SOC=86.58% | pack_3: cells=15, V=49.775V, I=-2.61A, SOC=86.80% | pack_4: cells=15, V=49.809V, I=-2.53A, SOC=87.02%
2026-06-29 01:10:53,986 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:10:57,428 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-2.67A, SOC=85.72% | pack_2: cells=15, V=49.767V, I=-2.56A, SOC=86.57% | pack_3: cells=15, V=49.775V, I=-2.57A, SOC=86.80% | pack_4: cells=15, V=49.809V, I=-2.52A, SOC=87.01%
2026-06-29 01:11:03,480 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:11:06,921 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-2.70A, SOC=85.72% | pack_2: cells=15, V=49.769V, I=-2.61A, SOC=86.57% | pack_3: cells=15, V=49.773V, I=-2.63A, SOC=86.80% | pack_4: cells=15, V=49.809V, I=-2.47A, SOC=87.01%
2026-06-29 01:11:12,974 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:11:16,416 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-2.67A, SOC=85.71% | pack_2: cells=15, V=49.769V, I=-2.61A, SOC=86.57% | pack_3: cells=15, V=49.772V, I=-2.62A, SOC=86.79% | pack_4: cells=15, V=49.809V, I=-2.57A, SOC=87.01%
2026-06-29 01:11:22,467 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:11:25,905 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-2.68A, SOC=85.71% | pack_2: cells=15, V=49.769V, I=-2.57A, SOC=86.56% | pack_3: cells=15, V=49.774V, I=-2.58A, SOC=86.79% | pack_4: cells=15, V=49.809V, I=-2.52A, SOC=87.00%
2026-06-29 01:11:31,959 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:11:35,398 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.776V, I=-2.68A, SOC=85.71% | pack_2: cells=15, V=49.769V, I=-2.55A, SOC=86.55% | pack_3: cells=15, V=49.775V, I=-2.57A, SOC=86.79% | pack_4: cells=15, V=49.809V, I=-2.49A, SOC=87.00%
2026-06-29 01:11:41,450 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:11:44,888 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.777V, I=-2.67A, SOC=85.70% | pack_2: cells=15, V=49.769V, I=-2.55A, SOC=86.55% | pack_3: cells=15, V=49.775V, I=-2.57A, SOC=86.78% | pack_4: cells=15, V=49.809V, I=-2.49A, SOC=87.00%
2026-06-29 01:11:50,963 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:11:54,408 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.777V, I=-2.04A, SOC=85.70% | pack_2: cells=15, V=49.762V, I=-2.53A, SOC=86.54% | pack_3: cells=15, V=49.769V, I=-2.56A, SOC=86.78% | pack_4: cells=15, V=49.804V, I=-2.47A, SOC=86.99%
2026-06-29 01:12:00,460 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:12:03,904 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.781V, I=-2.05A, SOC=85.69% | pack_2: cells=15, V=49.770V, I=-1.98A, SOC=86.54% | pack_3: cells=15, V=49.770V, I=-1.91A, SOC=86.78% | pack_4: cells=15, V=49.808V, I=-1.92A, SOC=86.99%
2026-06-29 01:12:09,959 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:12:13,402 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.783V, I=-2.03A, SOC=85.69% | pack_2: cells=15, V=49.772V, I=-1.97A, SOC=86.54% | pack_3: cells=15, V=49.775V, I=-1.94A, SOC=86.78% | pack_4: cells=15, V=49.812V, I=-1.91A, SOC=86.99%
2026-06-29 01:12:19,456 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:12:22,898 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.785V, I=-2.07A, SOC=85.69% | pack_2: cells=15, V=49.773V, I=-1.99A, SOC=86.54% | pack_3: cells=15, V=49.775V, I=-2.01A, SOC=86.78% | pack_4: cells=15, V=49.815V, I=-1.94A, SOC=86.98%
2026-06-29 01:12:28,952 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:12:32,396 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.787V, I=-2.07A, SOC=85.68% | pack_2: cells=15, V=49.773V, I=-2.01A, SOC=86.53% | pack_3: cells=15, V=49.775V, I=-2.01A, SOC=86.77% | pack_4: cells=15, V=49.815V, I=-1.95A, SOC=86.98%
2026-06-29 01:12:38,449 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:12:41,890 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.789V, I=-2.07A, SOC=85.68% | pack_2: cells=15, V=49.774V, I=-2.01A, SOC=86.53% | pack_3: cells=15, V=49.778V, I=-2.03A, SOC=86.77% | pack_4: cells=15, V=49.817V, I=-1.96A, SOC=86.97%
2026-06-29 01:12:47,946 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:12:51,386 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.789V, I=-2.07A, SOC=85.68% | pack_2: cells=15, V=49.778V, I=-1.98A, SOC=86.53% | pack_3: cells=15, V=49.779V, I=-1.98A, SOC=86.77% | pack_4: cells=15, V=49.818V, I=-1.94A, SOC=86.97%
2026-06-29 01:12:57,440 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:13:00,883 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.789V, I=-2.18A, SOC=85.67% | pack_2: cells=15, V=49.781V, I=-1.98A, SOC=86.53% | pack_3: cells=15, V=49.781V, I=-1.96A, SOC=86.77% | pack_4: cells=15, V=49.819V, I=-1.91A, SOC=86.97%
2026-06-29 01:13:06,935 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:13:10,375 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.789V, I=-2.08A, SOC=85.67% | pack_2: cells=15, V=49.784V, I=-1.99A, SOC=86.52% | pack_3: cells=15, V=49.782V, I=-2.02A, SOC=86.76% | pack_4: cells=15, V=49.820V, I=-1.95A, SOC=86.96%
2026-06-29 01:13:16,426 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:13:19,871 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.789V, I=-2.07A, SOC=85.67% | pack_2: cells=15, V=49.784V, I=-1.99A, SOC=86.52% | pack_3: cells=15, V=49.785V, I=-2.00A, SOC=86.76% | pack_4: cells=15, V=49.820V, I=-1.94A, SOC=86.96%
2026-06-29 01:13:25,923 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:13:29,366 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.790V, I=-2.05A, SOC=85.67% | pack_2: cells=15, V=49.784V, I=-1.98A, SOC=86.52% | pack_3: cells=15, V=49.785V, I=-1.98A, SOC=86.76% | pack_4: cells=15, V=49.820V, I=-1.91A, SOC=86.96%
2026-06-29 01:13:35,423 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:13:38,854 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.790V, I=-2.06A, SOC=85.66% | pack_2: cells=15, V=49.784V, I=-1.98A, SOC=86.52% | pack_3: cells=15, V=49.785V, I=-1.99A, SOC=86.76% | pack_4: cells=15, V=49.820V, I=-1.92A, SOC=86.95%
2026-06-29 01:13:44,917 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:13:48,356 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.790V, I=-2.05A, SOC=85.66% | pack_2: cells=15, V=49.784V, I=-1.97A, SOC=86.51% | pack_3: cells=15, V=49.786V, I=-1.99A, SOC=86.75% | pack_4: cells=15, V=49.820V, I=-1.92A, SOC=86.95%
2026-06-29 01:13:54,410 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Warn read OK: pack_1: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_2: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_3: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled | pack_4: fully=OFF, charge_fet=ON, discharge_fet=ON, warnings=Control State: Current limit function disabled
2026-06-29 01:13:57,847 [Monitor] [Monitor] [debug 2] [INFO] [monitor] Analog read OK: packs=4 | pack_1: cells=15, V=49.792V, I=-2.06A, SOC=85.66% | pack_2: cells=15, V=49.784V, I=-1.94A, SOC=86.51% | pack_3: cells=15, V=49.787V, I=-1.97A, SOC=86.75% | pack_4: cells=15, V=49.820V, I=-1.91A, SOC=86.94%